updated
11/2/2006
Goggles/Presentation
System
See
information on Pharaoh,
the 3T presentation machine. See
Goggles
for a description of the setup.
Jerome
Jerome will be the new CNL webserver replacing merlin
Mrisun
MR1
Has spiral and spiralio sequences that work.
See also the Scanners page.
4/1/2003
Rex installed an additional disk on the scanner which is a research-only
disk. It can be found under /usr/g/bin/res or /res. It is a 36 GB
disk, so it should give people a little more storage.
MR2
Does
not have spiral sequences. See also the Scanners
page.
4/2/2003
Rex installed an additional disk on the scanner which is a research-only
disk. It can be found under /usr/g/bin/res or /res. It is a 36 GB
disk, so it should give people a little more storage.
MR3
Has
spiral and spiralio sequences. See
also the Scanners page.
4/1/2003
Rex installed an additional disk on the scanner which is a research-only
disk. It can be found under /usr/g/bin/res or /res. It
is a 36 GB disk, so it should give people a little more storage.
9/18/2003
MR3 Cabling for fMRI experiments is set up and working.
Pharaoh
The presentation machine, permanantly set up at the 3T. It is a
Dell Dimension 8300 and has a 3.0 Ghz processor, 2 GB of main ram,
a large SATA hard drive, an NVIDIA GeForce FX 5200 video card with
128 mb of ram onboard and 3d-stereo capability.
To
clone the desktop:
The
secondary monitor (i.e., goggles) must be plugged into the computer
BEFORE it is booted. We want the display to be set to clone, but
it may come up as an extended destop. If it comes up as an extended
desktop,
Right
click on the desktop->Properties->Settings->Advanced->GeForce
FX 5200->nView display mode->nView modes.
Choose
"clone" (not the default dualview). Make sure "Expand
my desktop" is NOT checked.
Tommy
The raid tower is data4.
8/25/2003
Tommy has idl 6.0. Type
>idl
to get it in commandline form. Type
>idlde
to get the gui interface.
|